TS Cloud - Smart camera app

How to add TS Cloud wifi camera

Warm Tips：

The camera supports 2.4G wifi only, which can be set from your router.
It’s better to use the camera under strong wifi signal environment.
And it’s normal for IP camera if it is affected by network and delayed.
APP Account: It supports email only.
If it is offline or wifi cannot be connected, please reset and connect it again. When resetting, there will be a short sound which means reset successfully. When connecting, make the camera close to your router.
When turn off the ‘Motion Tracking’, the camera would turn itself, then stop.
Try to keep away from the metal space.Avoid it being blocked by furniture, microwave oven.
Avoid the space where the audio, video and data lines are wound, and keep the space away from them as large as possible.Ensure that as close as possible to the coverage of wireless Wi-Fi signals.

How to Reset Camera

Reset Button Press and hold Reset for about 5 seconds. When the horn sounds short voice, the reset is successful.

ADD Camera

1.Register and log into the APP

2.Click ‘+’ > I heard’Waiting to connect’

3. Enter your wifi password, and then make the camera lens face to the QR code directly. After there is voice prompt from the camera, click ‘Next’ and wait for connecting.

4. After connected successfully, named your camera, and it will complete.
Finally, there will be a prompt that if you need cloud storage or not. If there is no need, just click ‘Start using my YI’ and it is ok.

5GHz wifi cannot be supported, it supports 2.4GHz only.
The hidden wifi cannot be supported.
The special characteristics cannot be supported.
The settings on the router cannot be started, such as AP isolation, anti rubbing network to restrict wifi access.